• Full RGB with 16 bit dimming curve
• Wireless DMX Control
• Up to 12 hour runtime from fully charged battery (5 hours full white)
• 50 preset colours
• 20 preset colour chases
• Charging Cycle Approximately 8 hours
• Wireless Firmwire Update

LAMP

• RGB LED

• Lumen 1600lm

• LiteWare-HO conforms to the following standards:
• EN 61000-6-3   Light Industrial Emissions
• EN 61000-4-2   Heavy Industrial Immunity

• 1-510 Wireless DMX Mode Address

STAND ALONE MODE

• 601-650 Fixed Colour Mode
• 651-660 Colour Fade Sequence
• 661-670 Colour Snap Sequence
• The display will blank after 5 seconds of button activity

 WIRELESS DMX MODE (Address 1-510)

• In WDMX Mode—the unit will simply respond to the DMX levels being received. DMX channel allocations are as follows:
• Start Address  Red Level
• Start Address 1 Green Level
• Start Address 2 Blue Level
• In WDMX mode, the unit will hold the last DMX value upon loss of signal of DMX. The unit will store this level when turned off so it can be resumed when it is powered back up.
• If the battery is disconnected, these values will be lost.  

WDMX LINKNG

• Lite-Ware-HO is automatically unlinked from the transmitter when plugged into the charger. The link status is shown on the LED display on the base of the unit when Lite-Ware-HO is powered on.
• Please refer to your W-DMX transmitter user normal for further information about the linking process. 

 MEASUREMENTS

• H x W x D: 180 x 210 x 330mm

 WEIGHT

•  15.5 KG